Sharp MX-2700N - Manual (Page 22)

21
THE MEANING OF "R" IN PAPER SIZES
Some original and paper sizes can be placed in either the vertical or the horizontal orientation. To differentiate between
vertical and horizontal orientations, paper sizes in the horizontal orientation will be followed by an "R" (for example, A4R,
B5R, 8-1/2" x 11"R, 5-1/2" x 8-1/2"R).
Sizes that can be placed only in the horizontal orientation (A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13") do not include
"R" in their size indication.
USEABLE PAPER
Various types of paper are sold. This section separately explains the plain paper and the special media that can be used
with the machine. For detailed information on the sizes and types of paper that can be loaded in each tray of the
machine, see the specifications in the Safety Guide and "Paper Tray Settings" in the System Settings Guide.
More information on plain paper and special paper
Plain paper that can be used in tray 1 to tray 5
• SHARP standard paper (see the Safety Guide for the specifications of (64 g/m 2 (17 lbs.)) SHARP standard paper).
• Pain paper other than SHARP standard paper (60 g/m 2 to 105 g/m 2 (16 lbs. to 28 lbs.))
• Recycled paper, coloured paper and pre-punched paper must meet the same specifications as plain paper.
Contact your dealer or nearest authorised service representative for advice on using these types of paper.
Special media that can be used in the bypass tray
• Transparency film
• Heavy paper, postcards, label sheets, envelopes, glossy paper, tab paper, and other special media
Horizontal orientation
"R" is appended. Vertical orientation
"R" is not appended.
Can be placed only in the
horizontal orientation
"R" is not appended.
Useable paper Remarks
Tray 1 to tray 5 Plain paper See "More information on plain paper
and special paper" below.
Bypass tray Plain paper
Special paper
A4R
(8-1/2" x 11"R)
A4
(8-1/2" x 11")
A3
(11" x 17")