Before using the machine, Part names and functions, Exterior – Sharp MX-2700N User Manual
Page 5
4
This chapter provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1)
Document cover*
1,
*
2
This holds down the original.
(2)
Reversing single pass feeder*
1,
*
2
(automatic document feeder)
This automatically feeds and scans multiple originals. Both
sides of two-sided originals can be automatically scanned.
☞
(3)
Front cover
Open this cover to switch the main power switch to "On"
or "Off" or to replace a toner cartridge.
☞
☞
REPLACING THE TONER CARTRIDGES
(page 58)
(4)
Paper pass unit
*1
This transfers output to the saddle stitch finisher.
(5)
Operation panel
This is used to select functions and enter the number of
copies.
☞
(page 9)
(6)
Exit tray unit (right tray)
*1
When installed, output can be delivered to this tray.
(7)
Output tray (centre tray)
Copy jobs and print jobs are delivered to this tray.
(8)
Finisher*
1
This can be used to staple output. A punch module can
also be installed to punch holes in output.
☞
1
BEFORE USING THE MACHINE
(2)
(3) (4)
(7)
(6)
(5)
(8)
(1)
When a finisher, paper pass unit and
saddle stitch finisher (peripheral
devices) are not installed.
When a finisher (peripheral
device) is installed.
When an automatic
document feeder is not
installed.
*1 Peripheral Devices
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.
*2 The MX-2300N/MX-2700N are equipped as standard with peripheral devices. On the MX-2300G/MX-2700G, you can
select whether to equip the machine with a document cover or a reversing single pass feeder.