Sharp MX-2700N - Manual (Page 53)

52
This chapter explains how to clean the machine and replace the toner cartridge or waste toner box.
REGULAR MAINTENANCE
To ensure that the machine continues to provide top quality performance, periodically clean the machine.
CLEANING THE DOCUMENT
GLASS AND AUTOMATIC
DOCUMENT FEEDER
If the document glass, document backplate sheet, or
automatic document scanning area becomes dirty, the dirt
will appear as dirty spots or coloured lines or white lines in
the scanned image. Always keep these parts clean.
Wipe the parts with a clean, soft cloth.
If necessary, moisten the cloth with water or a small amount
of neutral detergent. After wiping with the moistened cloth,
wipe the parts dry with a clean dry cloth.
Document glass
Document backplate sheet
Scanning area
If coloured lines or white lines appear in images scanned
using the automatic document feeder, clean the scanning
area (the thin long glass next to the document glass).
To clean this area, use the glass cleaner that is stored in
the automatic document feeder. After using the glass
cleaner, be sure to return it to its storage position.
Examples of lines in the image
(1) Open the automatic document feeder and
remove the glass cleaner.
(2) Clean the scanning area with the glass cleaner.
(3) Replace the glass cleaner.
5
MAINTENANCE
Warning
Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical
components or the fusing unit inside the machine, fire or electrical shock may result.
Do not use thinner, benzene, or similar volatile cleaning agents to clean the machine. These may degrade or discolour the housing.
Black lines White lines