SMC Networks SMC8014 - Manual (Page 19)

- 19 -
The second section is used to configure Access Rules for the Private LAN to the Internet. These
rules will block services on the private LAN to the Internet.
For convenience, each Access Control section includes 2 filtering options:
•
Predefined Filtering
•
Customer Defined Filtering
Predefined Filtering Access Rule:
1. On the Side Navigation bar, click on [Firewall] then select [Access Control]
2. Under the Predefined Section, click on the [Add] button
3. On the Predefined Filter page, select the service that you want to block from the pull-
down menu
4. Select the [LAN IPs] that you want this access rule to apply to. You can choose to apply
this rule to Any IP Address, a Single IP Address, or a Range of IP Addresses.
a. Any IP Address [Any] – choose this option to block all LAN clients. You don’t
need to configure the [Start IP] or [End IP] options.
b. Single IP Address [Single address] – choose this option to block a single LAN
client. Enter the LAN IP address of the PC in the [Start IP] field.
c. IP Address Range [Address Range] – choose this option to block a range of LAN
clients. Enter the starting LAN IP address in the [Start IP] field and the ending
LAN IP address of the range you want in the [End IP] field.
5. When your configuration is complete, click the [Apply] button to save your changes and
return to the main Access Control page.
Customer Defined Filtering Access Rule (Custom):
1. On the Side Navigation bar, click on [Firewall] then select [Access Control]
2. Under the Customer Defined Section, click on the [Add] button