Samsung Digimax A402 - Manual (Page 70)

《70》
File name
● The first stored folder name is 100SSCAM, and the first file name is S4020001.
● File names are assigned sequentially from S4020001 → S4020002 → ~ → S4029999.
● The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM →
101SSCAM → ~ → 999SSCAM.
● The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
INFORMATION
● Even if the batteries are removed and inserted again, the power off setting will be
preserved.
● Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a movie clip.
INFORMATION
Auto power off
● Setting Power Off
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [PWR SAVE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [OFF] : The power off function will not operate.
[1, 3, 5, 7, 10 MIN] : The power will turn off automatically if not used for the period of time
specified.
5. Press the menu button twice and the menu will disappear.
■ This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
2048
◀ ▶
SETUP
FILE
PWR SAVE
LANGUAGE 1 MIN
3 MIN
5 MIN
BACK: ◀ SET:OK