Sony W700i - Manual (Page 28)

This is the Internet version of the user's guide. © Print only for private use.
28 Calling
•
Answer and reject calls when using a
handsfree kit.
Voice commands can only be saved in
the internal phone memory, not on the
SIM card. When recording, make sure
that you are in a quiet environment
and try to use names that are distinct
from each other,
%
30 Tips when
recording and using voice commands .
Before voice dialling
You must first activate the voice
dialling function and record your voice
commands. An icon appears next to
a phone number that has a voice
command.
To activate voice dialling and record
names
1 }
Settings
}
the General tab
}
Voice control
}
Voice dialling
}
Activate
}
Yes
}
New voice and
select a contact.
2 If the contact has more than one
number, use
and to view the
numbers. Select the phone number
to which you want to add the voice
command. Now you are going to
record a voice command such as
“John mobile” for the phone number
you selected.
3 Instructions appear. Wait for the tone
and say the command that you want
to record. The voice command is
played back to you.
4 If the recording sounds ok
}
Yes .
If not,
}
No and repeat step 3.
5 To record another voice command for
a contact
} New voice }
Add again
and repeat steps 2-4 above.
Caller name
You can choose whether you want to
hear the recorded contact name when
you receive a call from that contact.
To turn the caller name on or off
}
Settings
}
the General tab
}
Voice
control
}
Play caller name .
Voice dialling
You can voice dial by saying a pre-
recorded voice command. Start voice
dialling from standby using the phone,
a portable handsfree, a Bluetooth™
headset or by saying your magic word.
To make a call from the phone
1 From standby, press and hold one of
the volume buttons.
2 Wait for the tone and say the name
you recorded earlier, for example
“John mobile”. The name is played
back to you and the call is connected.