23 gb – Sony KE-P37XS1 User Manual
Page 23
23
GB
FILM MODE
This option is set to Auto to improve the quality of the pictures in movement of the films. To cancel this function,
press
v
or
V
to select Off. Finally, press OK to store.
AV2 OUTPUT / AV3 OUTPUT
The "AV2 Ouptut" and "AV3 Output" options allows you to select the source to be output from the Scart connectors
3/
and
2/
2 so that you can record from these Scart any signal coming from the TV or from an
external equipment connected to the Scart connector
1/
,
2/
and
3/
or side connectors
5
or
5 and
5.
If your VCR or DVD recorder supports SmartLink, this procedure is not necessary.
To do this:
Once you have entered into the "Features" menu as it is explained in the previous page and after selecting the option,
press OK. Then press
v
or
V
to select the desired output signal:
TV
to output the aerial source.
AV1
to output sources connected to
1/
.
AV2
to output sources connected to
2/
(only for AV3 Output).
AV3
to output sources connected to
3/
(only for AV2 Output).
AV5
to output sources connected to
5 or
5 and
5.
AUTO to output the signal that is being viewed on the TV.
• If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.
• If you have connected a decoder to the Scart
2/
or
3/
3 or to a VCR connected to one of these
Scarts, please remember to change back the "AV2 Output" or “AV3 Output” to “TV” for correct
unscrambling.
SMARTLINK
Both Scart connectors
2/
and
3/
support SmartLink, but they cannot support SmartLink at the
same time. This option allows you to select which of the Scart connectors you want to support SmartLink.
To do this:
Once you have entered the "Features" menu as it is explained in the previous page and after selecting the option, press
OK. Then press
v
or
V
to select AV2 or AV3. Finally press OK to store.
CONNECTION GUIDE
Even you have already connected the external equipment to the TV set, it is important for you to follow the
instructions of this menu. If you proceed in this way, you will get the optimum picture settings related with the
optional equipment.
To do this:
1
Once you have entered the "Features" menu as it is explained in the previous page and after selecting the option,
press OK. Next press
v
or
V
to chose the equipment you want to connect among the available: SAT (satellite),
Decoder, DVD, GAME, VIDEO or DVD rec. (DVD recorder). Next press
b
to select the equipment chosen
(equipment selected also can be deleted by pressing
B
). Once you have selected all the equipment to be connected,
press
v
or
V
to select "Confirm" and press OK.
2
A new menu will appear showing you on which Scart connector of the rear of the TV should be connected each
equipment. Please connect each equipment according to this information to get the optimum picture setting of the
optional equipment.
We strongly recommend you to follow our connection proposals, but in case you do not agree press
B
or
b
to select "No" and next press the OK button. A new menu appears on the screen in which you can assign the
connections according to your preferences.
3
Once you have connected the optional equipment, press
B
or
b
to select "OK" and finally press the OK button
of the remote control.
S
S
S
S
S
S
S
TV Functions
continued...