Using the built-in light – Sony AC-L User Manual

Page 42

Advertising
background image

42

– CCD-TR618 only

You can use the built-in light to suit your shooting situation. The recommended
distance between the subject and camcorder is about 1.5 m (5 feet).

Press LIGHT until the

indicator appears in the viewfinder while your

camcorder is in CAMERA mode. The built-in light turns on.
If you turn the POWER switch to OFF (CHARGE), the built-in light turns off
simultaneously. You cannot turn the built-in light on by turning the POWER switch to
CAMERA again.
To turn on the built-in light again, press LIGHT again in CAMERA mode.

To turn off the built-in light

Press LIGHT until no indicator appears in the viewfinder.

To turn on the built-in light automatically

Press LIGHT until the

indicator appears in the viewfinder.

The built-in light automatically turns on and off according to the ambient brightness.

CAUTION

Be careful not to touch the lighting section, because the plastic window and
surrounding surfaces are hot while the light is on. It remains hot for a while after
the light is turned off.

DANGER

Not to be handled by children.
Emits intense heat and light.
Use with caution to reduce the risk of fire or injury to persons.
Do not directly light at persons or materials from less than 4 feet (1.22 m) during
use and until cool.
Turn the built-in light off when not in use.

Using the built-in light

CCD-TR618

LIGHT

Advertising