Self-diagnosis display – Sony AC-L User Manual

Page 55

Advertising
background image

55

Troubleshooting

Self-diagnosis display

Five-digit display

Cause and/or Corrective Actions

• You are using a battery pack that is not an

“InfoLITHIUM” battery pack.

c

Use an “InfoLITHIUM” battery pack. (p. 58)

• Moisture condensation has occurred.

c

Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 60)

• The video heads are dirty.

c

Clean the heads using the Sony V8-25CLD cleaning
cassette (optional). (p. 61)

• A malfunction other than the above that you can service

has occurred.

c

Remove the cassette and insert it again, then operate
your camcorder.

c

Disconnect the power cord of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.

• A malfunction that you cannot service has occurred.

c

Contact your Sony dealer or local authorized Sony
service facility and inform them of the 5-digit code.
(example: E:61:10)

If you are unable to rectify the problem even if you try corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination of
a letter and figures) in the viewfinder or the
display window. If a 5-digit code is displayed,
check the following code chart. The last two digits
(indicated by ss) will differ depending on the
state of your camcorder.

C:21:ss

Viewfinder

Self-diagnosis display

•C:ss:ss

You can service your camcorder
yourself.

•E:ss:ss

Contact your Sony dealer or local
authorized Sony service facility.

E:61:ss

E:62:ss

C:31:ss
C:32:ss

C:04:ss

C:22:ss

C:21:00

Advertising