Using the drive on the cradle – Sony MPD-AP20U User Manual

Page 17

Advertising
background image

17

Continued

Preparation

Using the Drive on the Cradle

If you carry the drive with you as well as use it with your computer often, using the
cradle is extremely convenient. If you connect your computer and the drive through
the cradle, you can take the drive with you whenever you want. Then, all you need to
do is set the drive on the cradle when you want to use it with your computer – no
reconnections necessary.

1 Attaching the ferrite clamp

You need to attach the provided ferrite clamps at both ends of the cradle’s USB
cable.

Note

Ferrite clamps serve to reduce the noise generated by cables in compliance with local standards.
Make sure that the clamps are properly attached.

Cradle

Wind once

8 cm

Close firmly until
you hear a click

Open the extension when
setting the drive on the
cradle.

8 cm

Advertising