Sony RM-AX4000 - Manual (Page 50)

50
7
Press the BACK button or the
COMMANDER OFF button.
BACK
or
OFF
COMMANDER
“LEARN” appears as the Display title.
LEARN /1
SU
LEARN
NG
TV A-CBL D-SAT DVD
If you want to teach another signal,
repeat steps 4 - 6.
8
Press and hold the
COMMANDER OFF button for
more than 2 seconds.
OFF
COMMANDER
The Remote Commander turns off.
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The previous status
returns, and the Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button or the COMMANDER
OFF button, the previous LCD display returns.
If the Remote Commander does
not seem to be working properly,
repeat from step 5.
If the learned key or button does not operate
properly, teach once again. (For example, if the
volume becomes very loud after pressing the
VOLUME + button just once, noise may have
interfered during the learning procedure.)
When you teach signals to the
VOLUME +/ – or MUTING buttons
• If you have programmed any signal on the
VOLUME +/– or MUTING button for
components other than TV and RCVR
(Receiver/Amplifier) using the learning
function, that signal will be transmitted only
when you select that component.
• If you have programmed any signal for the
VOLUME +/– or MUTING button of TV or
RCVR (Receiver/Amplifier) using the
learning function, that signal will also be
transmitted when you select another
component.
However, if you have programmed any
signal for the VOLUME +/– or MUTING
button of another component, that signal will
be transmitted only after you select that
component.
Using non-preset remote control
operations (continued)