Sony RM-AX4000 - Manual (Page 41)

Unit Settings
41
3
Press “BEEP” on the Label keys.
BEEP
The setting display for beep appears.
The current setting is shown inside
the [ ], while the other flashes.
OTHER
SU
LEARN
NG
BEEP [ ON ] OFF
4
Press the ON or OFF key to select
the beep.
ON: Turns on the beep.
OFF: Turns off the beep.
The beep setting changes and a beep
sounds each time you press the key.
5
Press and hold the
COMMANDER OFF button for
more than 2 seconds.
OFF
COMMANDER
The Remote Commander turns off.
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The previous status
returns, and the Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button or the COMMANDER
OFF button, the previous LCD display returns.
Setting the beep
The Remote Commander (RM-AX4000) is
preset at the factory with the
confirmation beep set to on.
To change this setting, perform the
following procedure.
1
While pressing the
COMMANDER OFF button,
press the MUTING button.
MUTING
OFF
COMMANDER
“SET” appears as the Display title.
SET
SU
LEARN
NG
LIGHT DISPLAY OTHER
If “OTHER” does not flash on the
Label keys, press the Display title
(SET) repeatedly until it appears.
2
Press “OTHER”on the Label keys.
OTHER
“OTHER” appears as the Display title.
OTHER
SU
LEARN
NG
BEEP DS_TIME CLOCK RESET