Sony RM-AX4000 - Manual (Page 76)

76
KEY DISPLAY
POWER
1 – 9, 0, ENTER
•
2PIC
SWAP
DISPLAY
MAIN/SUB
INPUT
WIDE
F
f
g
G
OK
EPG
MENU
TV
FUNCTION
To turn the power on/off
To change the channel (To
change to channel 5, for
example, press 0 and 5, or
press 5 and ENTER.)
To enter the subchannel
number
To turn on/off the twin
pictures
To swap the main picture and
the sub picture
To display the current
channel on TV
To switch the sound of the
duplex broadcast
To change the input mode
To switch to the WIDE mode
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left
To enter the selection of the
MENU display
To use the program guide
To call up the MENU
Appendix
Table of preset
functions
Note
There may be some components or functions
that cannot be operated with this Remote
Commander.
KEY DISPLAY
EXIT
TOOLS
VOLUME +
VOLUME –
CHANNEL +
CHANNEL –
MUTING
RECALL
TV_TUNER
ANT/SW
NORMAL
SOUND
PICTURE
SLEEP
FUNCTION
To exit the MENU
To go into the OPTION
setting mode
Volume up (TV)
Volume down (TV)
Channel up
Channel down
To mute the volume on the
TV. Press again to turn
muting off.
To select the channel
previously selected
To return to the TV (to reset
the external input)
To switch the multiplex
antenna input
To return the picture and
sound quality to the standard
status
To select the sound adjusting
mode
To select the picture adjusting
mode
To operate SLEEP function on
the TV (works only for a TV
with SLEEP function)