Woodstock SHOP FOX W1706 User Manual
Page 25
Advertising
-23-
Model W1706 (Mfg. Since 3/13)
SE
TU
P
7. Loosen the thumbscrew on the support bearing
adjustment shaft (see
Figure.27).
8. Use the knurled knob to position the support
bearing approximately 0.016" away from the back of
the blade, as illustrated in
Figure.29.
.
Tip:.For a quick gauge, fold a crisp dollar bill
in half twice (four thicknesses of a dollar bill
is approximately 0.016") and place it between
the support bearing and the blade, as shown in
Figure 30.
9. Re-tighten the thumbscrew to keep the support
bearing locked in place.
0.016"
Figure.29. Support bearing positioned
0.016" away from the back of the blade.
Figure.30. Dollar bill folded twice in half
for a quick 0.016" gauge.
Advertising