Misfeed removal, Misfeed in the rspf – Sharp AR-M208 User Manual
Page 75
73
4
COP
IE
R
TROUBLE
?
MISFEED REMOVAL
When a misfeed occurs, the copier will stop. The message "Clear paper path." will appear in the display
along with an illustration showing paper misfeed locations.
●
If paper becomes accidentally torn during removal, be sure to remove all pieces. Be careful not to
damage the photoconductive drum.
●
For misfeeds in optional equipment, see their respective sections of the operation manual.
★KEY OPERATOR If the backlight change of the display is enabled using a key operator program, the
color of the backlighting will change to orange when a misfeed occurs. See page 16 of the KEY
OPERATOR'S GUIDE.
First confirm the misfeed locations.
Misfeed in the RSPF
If an original misfeed occurs in the RSPF, the copier will stop and the message "Clear paper path." will
appear.
1
Remove the misfed originals.
Location A
●
Open the feeding roller cover and pull the misfed original gently to the left and out from the
document feeder tray. Close the feeding roller cover.
(p.75, 76, 80)
(p.80)
(p.79)
(p.81)
(p.80)
(p.73)
A
C
B
Feeding roller cover
Ar-M208_sec.book 73 ページ ２００２年６月１３日 木曜日 午後２時３７分