Sharp AR-M208 - Manual (Page 76)

MISFEED REMOVAL
74
COP
IE
R
TROUBLE
?
Location B
● Open the document feeder cover, rotate the rollers in the direction indicated by the arrow to
feed the misfed paper, and then gently remove the misfed original after closing the document
feeder cover.
● If a small original such as 5-1/2" x 8-1/2" original has misfed or an original has misfed in the
reversing tray, open the right side cover and gently remove the misfed original. Close the right
side cover.
Location C
● Gently remove the misfed original from the exit area.
● If the misfed original cannot be easily removed from the exit area, open the front part of the
document feeder tray to remove the original. With the RSPF, pull out the reversing tray to
remove the misfed original.
NOTE:
With the RSPF, after removing the misfed original from the exit area, be sure to insert the
reversing tray into the exit area until it locks in place.
Rollers
Right side cover
Ar-M208_sec.book 74 ページ ２００２年６月１３日 木曜日 午後２時３７分