Sharp AR-M208 - Manual (Page 81)

MISFEED REMOVAL
79
4
COP
IE
R
TROUBLE
?
C. Misfeed in the transport area
1 Open the bypass tray and the side cover.
2 Use the green tabs on either side of the paper guide to rotate the guide
open and remove the misfed paper.
WARNING:
The fusing unit is hot. Take care in removing paper.
3 Close the side cover.
● Confirm that the misfeed display has been cleared.
Misfeed in the center tray
1 Remove the paper by pulling it into the center tray.
Ar-M208_sec.book 79 ページ ２００２年６月１３日 木曜日 午後２時３７分