Sony WEGA KLV S20G10 User Manual
Page 54
Other Information
54
KLV-S15G10/KLV-S20G10
2-630-164-11(1)
G:\#Sagyo\#SONY\18 KLV\0402\2630164111 KLV-
S1520G10\01US07OTH.fm
masterpage:3 columns Right
Only snow and noise appear on
the screen.
❑
Check if the antenna is broken or bent.
❑
Check if the antenna has reached the end of its serviceable life. (3-5 years in
normal use, 1-2 years at the seaside.)
Dotted lines or stripes.
❑
Keep the TV away from noise sources such as cars, motorcycles, or hair-
dryers.
No color/Dark picture/Color is
not correct
❑
Press
PICTURE MODE
to select the desired Picture mode (page 32).
❑
Adjust the Picture Mode options in the Video menu (page 42).
The picture is too bright.
❑
Press
PICTURE MODE
to select the desired Picture mode (page 32).
Noisy picture.
❑
Make sure that the antenna is connected using the supplied 75-ohm coaxial
cable.
❑
Keep the antenna cable away from other connecting cords.
❑
Do not use 300-ohm twin lead cables as interference may occur.
No sound/Noisy sound
Good picture, no sound.
❑
Check the volume control.
❑
Press
MUTING
or
VOL
+ so that “Muting” disappears from the screen
❑
Disconnect your headphones.
❑
Set
Speaker
to
On
in the Audio menu (page 44). If it is set to
Off
, sound is
not output from the TV’s speakers regardless of the TV’s volume control.
Audio noise.
❑
Make sure that the antenna is connected using the supplied 75-ohm coaxial
cable.
❑
Keep the antenna cable away from other connecting cords.
❑
Do not use 300-ohm twin lead cables as interference may occur.
❑
Press
MTS/SAP
to select
Mono
Striped noise during
playback/recording of a VCR.
❑
This is caused by video head interference. Keep your VCR away from the
TV.
❑
Leave a space of 30 cm (11 7/8 inches) between your VCR and the TV to
avoid noise.
❑
Avoid installing your VCR in front of the TV or at the side of the TV.
Cannot operate menu item.
❑
If the option you want to select appears in a pale color, you cannot select it.
Screen Mode changes
automatically with
16:9
Enhanced
set to
Auto
.
❑
The TV automatically detects the aspect ratio signal transmitted with the
picture signal and displays the picture at its original aspect ratio (page 52).
The picture looks distorted, with
people appearing unnaturally
short and thick, with
16:9
Enhanced
set to
On
.
❑
If you set
16:9 Enhanced
to
On
, the picture is forcibly compressed
vertically regardless of its aspect ratio signal. Therefore, a picture in the 4:3
aspect ratio, such as a normal 4:3 broadcast, looks unnatural because of
compression. This problem is more serious for a Letterbox movie because
the entire picture, including its upper and lower black bands, is compressed.
You can watch these pictures at their original aspect ratio by setting
16:9
Enhanced
to
Auto
.
Remote control does not operate.
❑
The batteries could be weak. Replace the batteries.
❑
Check the polarity of the batteries.
❑
Press the
TV (FUNCTION)
button first for TV operation.
❑
Point the remote control at the remote control sensor of the TV.
❑
Install the TV away from fluorescent lights.
❑
Press
FUNCTION
button for the device you want to control.
Problem
Possible Remedies
01US02WAR-UC.book Page 54 Sunday, April 3, 2005 5:53 PM