Attaching the vesa adaptor (klv- s15g10 only), Attaching the vesa adaptor (klv-s15g10 only) – Sony WEGA KLV S20G10 User Manual
Page 13
Introducing the TV
13
KLV-S15G10/KLV-S20G10
2-630-164-11(1)
G:\#Sagyo\#SONY\18 KLV\0402\2630164111 KLV-
S1520G10\01US03WEL.fm
masterpage:3 columns Right
Int
ro
duci
ng th
e TV
Attaching the VESA
adaptor (KLV-
S15G10 only)
If screw holes are required, attach the supplied VESA adaptor (brackets A
and B) to the TV when you attach the TV to the FDMI (Flat Display Mount
Interface) of VESA.
1
Remove the four screws illustrated below and remove the TV stand.
2
Attach bracket A (supplied) to the TV with four screws removed from
the TV stand.
3
Put the tabs of bracket B (supplied) into the square holes of bracket A.
4
Slide bracket B towards the TV to fit the tabs into the square holes.
If you put the TV and TV stand on the same level surface, it may
affect stability and could present danger. Place the TV on a level
surface as illustrated above.
When removing the TV stand from the TV, firmly grasp the TV
stand with both hands.
z
Put soft cloth under the
TV so as not to damage
the LCD screen’s
surface.
Bracket A
(Continued)
01US02WAR-UC.book Page 13 Sunday, April 3, 2005 5:53 PM