Sony DVS-V3232B/V3232M User Manual
Dvs-128, Dvs-rs1616, Dvs-a3232
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Cover
- Table of Contents
- Manual Structure
- 1.System Overview
- 2.Functions
- 2-1. Main Functions of Router System
- 2-2. Built-in Controller
- 2-3. Matrix Sizes
- 2-4. Number of Levels
- 2-5. Number of Units
- 2-6. Protect Function
- 2-7. Secret Function
- 2-8. Crosspoint Disable Setting Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232)
- 2-9. Password Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232)
- 2-10. Setting the Input/Output Name (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232)
- 2-11. Virtual Mapping Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232)
- 2-12. Free Assignment Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232)
- 2-13. Monitor Function (BKDS-V3292B only)
- 2-14. Tie Line Management (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232)
- 2-15. Phantom Function
- 2-16. Self-Diagnosis Function
- 2-17. Route Function
- 2-18. Enhanced Restriction of Selected Block (BKS-R1607/R3210 only)
- 3.Control Terminal
- 4.Setup Procedure
- 5.System Settings
- 5-1. Setting Items of the Primary Station
- A: DISPLAY CONTROL AREA
- A: DISPLAY UNIT LOCATION
- B: SET SOURCE/DEST TYPE
- C: SET DESTINATION NAME
- D: SET SOURCE NAME
- E : SET LEVEL TABLE
- F : SET ACTIVE UNIT NUMBER
- G: UPDATE BACKUP CONTROLLER
- H: SET GLOBAL PHANTOM
- J : NAME STYLE
- K: RESET TO DEFAULT TABLE
- K: DEFAULT TABLE
- L : SET PHYSICAL ASSIGNMENT
- M: SET INHIBIT TABLE
- N: SET DESCRIPTION NAME GROUP
- O: SET TIE LINES
- P : CHANGE PASSWORD
- Q: CHANGE CROSSPOINT
- R: CALL SECONDARY STATION
- S : SELECT INDICATION COLOR (Except for BKPF-R70 and HDS-V3232)
- U: SELECT REMOTE
- V : SELECT WARNING DISPLAY
- W: SYSTEM STATUS LOG
- X : DISPLAY S-BUS COMMUNICATION
- Y : DISPLAY TABLE (Except for HDS-V3232)
- Z : SET UNIT DETECTABLE
- 5-2. Setting Items of the Secondary Station
- A:SET UNIT LOCATION
- G:UPDATE BACKUP CONTROLLER
- H: SET PHANTOM TABLE
- K: RESET TO DEFAULT TABLE
- K: DEFAULT TABLE
- L : COPY TABLE DATA
- M: SET MONITOR FUNCTION (Except for HDS-V3232)
- N: SET PANEL TABLE (BKS-R1601/R3202/R3203)
- N: SET PANEL TABLE (BKS-R1607/R1608/R3204/R3205/R3209/R3210/R1617/R1618/R3219/R3220/R1621)
- N: SET PANEL TABLE (BKS-R3206/R3216)
- O: SET AVAILABLE DESTINATION (BKS-R3202/R3206)
- O: SET AVAILABLE DESTINATION O: SET AVAILABLE DESTINATION (BKS-R1607/R3210/R3216/R1617/R1618/R3219/ R3220/R1621)
- R: SET ROUTE (BKS-R1607/R1608/R3209/R3210/R3216/R1617/R1618/R3219/R3220/R1621)
- S : DISPLAY DESCRIPTION NAME
- U: SELECT REMOTE PROTOCOL
- V : DISPLAY UNIT STATUS (Except for HDS-V3232)
- Y : DISPLAY TABLE DATA (Except for HDS-V3232)
- Y : SET DISPLAY MODES (BKS-R3216/R1617/R1618/R3219/R3220/R1621)
- Z : SELECT SDI FORMAT (Except for HDS-V3232)
- Z : SET PANEL STATUS (BKS-R3204/R3205/R3206)
- Z : SET PANEL STATUS (BKS-R1607/R1608/ R3209/R3210/R3216/R1617/R1618/R3219/ R3220/R1621)
- Z : SELECT CONNECTION (DVS-RS1616 only)
- Z : SWITCHING FIELD (HDS-V3232 only)
- 5-3. Setting Items of the Primary Station on Monitor S-BUS (BKDS-V3292B only)
- 5-4. Setting Items of the Secondary Station on Monitor S-BUS (BKDS-V3293B only)
- M: SET AVAILABLE MONITOR LINE (DVS-V3232B/V6464B + ++ ++ BKDS-R3292B)
- L : COPY TABLE DATA <MONITOR MENU>
- N: SET PANEL TABLE (BKS-R1607/R1608/R3204/R3205/R3209/R3210) <MONITOR MENU>
- S : DISPLAY DESCRIPTION NAME <MONITOR MENU>
- Z : SET PANEL STATUS (BKS-R1607/R1608/ R3204/R3205/R3209/R3210) <MONITOR MENU>
- 5-5. Backup of Setting Data
- 5-6. When Data is Lost
- 5-7. Initialization of Table Data
- 5-8. Signal Switching Timing
- 5-1. Setting Items of the Primary Station
- 6.Confirmation of function
- 7.Change Information on DVS-128/HDS-X3000 Series
and DVS-V3232M/V6464M
- 7-1. Outline (DVS-128/HDS-X3000 Series)
- 7-2. Changed Menu (Primary Station Setting Items)
- Initial screen (DVS-128/HDS-X3000 Series)
- A : DISPLAY CONTROL AREA (DVS-128/HDS-X3000 Series)
- B : SET SOURCE/DEST TYPE (DVS-128/HDS-X3000 Series)
- E : SET LEVEL TABLE (DVS-128/HDS-X3000 Series)
- O : SET TIE LINES (DVS-128/HDS-X3000 Series)
- S : SET SOURCE ASSIGNMENT (DVS-128/HDS-X3000 Series) (Secondary Station Setting Items)
- 7-3. Changed Menu (Secondary Station Setting Items)
- Appendix