Sanyo DVW-7200 - Manual (Page 12)

– 12 – EN
VCR Functions
1 1
Recording
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record tab.
To record on it later, cover the hole with
adhesive tape.
Record tab
Select the chan-
nel to record.
1 1 2 2
with tab
SP
Select the desired
tape speed.
3 3
REC
4 4
Type of tape T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hour 6hour 8hour
Recording/Playback Time Tape Speed
1 2 3
4 5 6
7 8 9
0 +10
SPEED
REC OTR
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR(8:00) OTR(7:30)
5 5 6 6
STOP
OPEN
CLOSE
EJECT
Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for
broadcasting, see “RF Output Channel” section.
1 2 3
4 5 6
7 8 9
0 +10
STOP
PLAY
POWER
ZOOM
DISPLAY
SPEED AUDIO
OPEN CLOSE
DVD VCR
SLOW
EJECT
PAUSE
VCR TV
SKIP CH.
O SEARCH CLEAR
ENTER
MENU
TOP MENU SETUP
REC OTR
RETURN
6 6
5 5
2 2
3 3
4 4
Press [REC/OTR] repeatedly to select the
desired recording length.
SKIP CH.
VCR VCR
You CAN NOT copy a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press [PAUSE k k ].
• During the rec-pause mode, five C marks appear on the TV screen. Each C mark
represents one minute.
• Press it again to resume recording.
• Pause mode will be automatically cancelled after 5 minutes to prevent damage to
the tape and the video head.
VCR
Press first.
E D C A B
POWER
AV INPUT
VIDEO L - AUDIO - R
REW F.FWD STOP/EJECT PLAY L CHANNEL K O
OPEN/CLOSE
REC/OTR
REC VCR TIMER REC
A
1 1
5 5 6 6
2 2
4 4
Recording & OTR (One Touch Recording)
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
[ON]
SAP
This function will playback a tape
repeatedly from the beginning
when the tape reaches to the end.
VCR
Press first.
VCR VCR
Auto Repeat
MENU
2 2
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
[ON]
SAP
or
•Insert a tape with its record tab
into the unit.
2 2
PROGRAM NUMBER 1
DATE
– – / – –
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Select an empty program number.
Timer Recording
VCR VCR
VCR
Press first.
3 3
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”.
Hint Hint
• If you want to watch one channel while recording another...
1) Press [VCR/TV] to put the unit in TV position.
2) Select a channel you want to watch with the cable box or the satellite box.
• Refer to the “Hints for Cable Box or Satellite Box” section on page 6.
or
or
or
4 4 Select the desired month.
Select the desired day.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2 4 MON
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
• You can program one
year in advance.
or
or
1 1
MENU - M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END
TIME
CHANNEL
Available program
number flashes.
3 3
AUTO REPEAT B
Hint Hint
• To cancel Auto Repeat, follow steps 1)-2) above. Then, press [B], so that [OFF] appears
beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen at step 3), press [CLEAR/C.RESET] to exit.
H9880UD(EN).qx3 05.1.17 17:30 Page 12