Selecting a standard display, B.ch: 20.12 – Sennheiser EVOLUTIONWIRELESS SKP 100 User Manual
Page 11
10
Using the plug-on transmitter
The current state of the muting function or the RF signal is displayed on
the display panel of the plug-on transmitter:
Selecting a standard display
Audio signal is muted
Transmitter’s display panel:
“
MUTE
”
ቨ
is displayed
Audio signal is activated (muting is canceled)
Transmitter’s display panel:
“
MUTE
”
ቨ
is not displayed
RF signal is deactivated
Transmitter’s display panel:
Transmission icon
ብ
is not
displayed, “
MUTE
”
ቨ
is displayed
RF signal is activated
Transmitter’s display panel:
Transmission icon
ብ
is displayed,
“
MUTE
”
ቨ
is not displayed
You can also deactivate the RF signal on switch-on. For more infor-
mation, refer to the chapter “Switching the plug-on transmitter
on/off” on page 8.
Using the
ON
/
OFF
button, you can also activate/deactivate the RF
signal during operation. To do so, briefly press the
ON
/
OFF
button
and proceed as described on page 8.
̈
Press the
UP
button (
̆
)/
DOWN
button (
̄
) to select a
standard display:
Contents of the display Selectable standard display
“
Frequency/Name
”
“
Channel/Frequency
”
“
Name/Channel
”
MHz
533.875
ew100 G3
MUTE
P
AF
ብ
ቨ
ew100 G3
MHz
533.875
MUTE
P
AF
MHz
533.875
B.Ch: 20.12
MUTE
P
AF
B.Ch: 20.12
MUTE
P
AF
ew100 G3
SKP100_529675_0409_Sp9.book Seite 10 Donnerstag, 9. April 2009 1:48 13