Sennheiser EVOLUTIONWIRELESS SKP 100 User Manual
Page 16
15
Adjusting settings via the operating menu
Setting a transmission frequency for the current channel
̈
Set the desired frequency.
Selecting a channel and assigning this channel a frequency
̈
Set the desired channel.
̈
Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the
MUTE
switch
¾
, refer to page 9.
̈
Press the
UP
button (
̆
)/
DOWN
button (
̄
) until the “
Tune
”
menu item appears.
̈
Press the
SET
button.
The frequency selection appears.
̈
Press the
SET
button.
Your settings are stored.
You are back to the operating menu.
̈
Press the
UP
button (
̆
)/
DOWN
button (
̄
) until the “
Tune
”
menu item appears.
̈
Keep the
SET
button pressed until the frequency bank selec-
tion appears.
̈
Press the
SET
button.
The frequency selection appears.
Mode
Function
“
AF
On/Off
”
When the switch is in the
MUTE
position,
no audio signal is transmitted.
“
RF On/Off
”
When the switch is in the
MUTE
position,
the RF signal is deactivated.
“
Disabled
”
The muting function is deactivated.
SET
Select the MHz
value and confirm
Select the kHz
value; store the
setting
543
.200 MHz
Tu n e
548.
200
MHz
B.Ch: U.
1
B.Ch: U.
1
Tu n e
Call up “Tune”
Advanced
Menu
Tune
“Stored”
SET
SET
SET
SET
SET
Select the frequency
bank and confirm
548.200 MHz
B.Ch: U.
1
B.Ch: U. 1
Tu n e
Call up “Tune”
(special function)
Advanced
Menu
Tune
548.200 MHz
548
.200 MHz
Tu n e
Select the channel;
store the setting
SET
SET
SET
Call up
“Mute Mode”
Select the desired
setting
Store the setting
Advanced
Menu
Mute Mode
Mute Mode
Mute Mode
RF On/Off
AF On/Off
“Stored”
SET
SET
SKP100_529675_0409_Sp9.book Seite 15 Donnerstag, 9. April 2009 1:48 13