ScyTek Electronics A10 SERIES - Manual (Page 16)

Page 12 - Astra A10
1. Horn Chirps with Arm & Disarm. Selects one of three modes: Normal, Horn Chirps, and Horn
Chirps w/Warn.
Normal. When selected, the horn will honk only when the alarm is triggered.
Horn Chirps. When selected, the horn will provide the arm/disarm and trigger indications, allowing the
siren installation to be skipped.
Horn Chirps w/Warn. When selected, the horn will provide arm/disarm, trigger, and warn-away
indications.
2. Arm Mode. Selects one of three modes: Manual Arming or Passive Arming and Passive Arming
w/Countdown. With the Passive Arming w/Countdown mode selected, the siren will chirp every 2
seconds while counting down until the system passively arms. Note: If Auto Rearming is selected, the
siren will also chirp during Auto Rearm countdown.
3. Passive Door Locking. Selects whether or not the system will automatically lock the doors during
passive arm. (also used to set override code).
4. Ignition Controlled Locks. Selects whether or not the system will lock and unlock the doors with the
ignition.
5. Door Input Monitoring. Selects whether the system begins monitoring the door inputs after 10
seconds or 60 seconds. For vehicles with interior lights that remain on for an extended period of time
after the doors are closed, set for 60 seconds.
6. Auto Rearming Mode. When selected, the system will automatically re-arm 60 seconds after it is
disarmed if the doors have not been opened.
7. Door Unlock Pulse. Selects between one pulse or two pulse operation for the door unlock output.
Vehicles that require two pulses on the proper wire to unlock the doors can be interfaced directly
without the use of relays or any additional circuitry by programming the system for double unlock pulse.
8. Arming Chirps. Selects between normal and silent operation.
9. Extended Parking Lights. When selected, the parking lights will remain on for 30 seconds after
disarming the system.
10. Disarm with Auxiliary 1. When selected, activating the Auxiliary 1 output (usually used to open the
trunk) will disarm the alarm.
11. Door Lock Pulse Length. Selects between a 1-second, 3-second or 0.1-seconds output for door
locking and unlocking. Program to 3 seconds for vehicles equipped with vacuum door locking systems.
12. Anti-Carjack Mode. Enables Anti-Carjacking protection.
13. Anti-Carjack Type. Selects one of three modes for Anti-Carjacking: Active, Passive, or Full-Time.
Manual. When selected, pressing Button 2 will automatically engage the Anti-Carjacking feature.
Passive. When selected, the Anti-Carjacking feature will activate whenever a door is opened while the
ignition is on.
Full-Time. When selected, the Anti-Carjacking feature will automatically activate each time the ignition
is turned on.
14. Ignition Arm Mode. Ability to Arm the system with Ignition in On position.
15. Silent Arm/Disarm With Button 2. Silent Arm/Disarm by pressing momentarily button 2.
16. Disarm Mode. Selects between Standard operation and Two Stage Disarm mode.
Standard. When selected, the system will always disarm on the first press of the transmitter button.
Two Stage Disarm. When selected, the system will disarm on the first press of the transmitter button
only if the alarm is not actively triggered. If the alarm is sounding, pressing the button to disarm the
system will reset the alarm and quiet the siren. Pressing the button again will disarm the system. This
mode will keep the system armed but allow the siren to be muted in the event the shock sensor is
accidentally triggered by a non-intrusive event (such as an animal jumping on the vehicle, etc.).