Sony DAV-SB500W - Manual (Page 23)

Getting Star
ted
23 GB
Before connecting the AC power cords (mains leads) of this system and the surround amplifier to a wall
outlet (mains), connect the front and center speakers to the system and surround speakers to the
surround amplifier (page 14).
After connecting the speakers, surround
amplifier, IR transmitter, IR receiver, and the
AC power cords (mains leads), adjust the
wireless system for good transmission.
1
Press " / 1 on the system and POWER
on the surround amplifier.
The system and surround amplifier turn on
and the POWER/ON LINE indicator turns
red.
2
Orient the IR transmitter and IR
receiver to face each other.
Adjust the position until the POWER/ON
LINE indicator turns green.
Tip
The IR transmitter is movable for easy reorientation.
Notes
• Make sure that there is no obstruction such as a
person or object between the IR transmitter and the IR
receiver. Otherwise, the sound from the surround
speakers may be interrupted.
• If the POWER/ON LINE indicator turns red, the
transmission is incomplete. Adjust the position of the
IR transmitter and IR receiver until the POWER/ON
LINE indicator turns green.
• If the POWER/ON LINE indicator flashes in red, the
IR receiver is receiving an infrared ray from another
Sony’s wireless product. Move the IR transmitter
and/or the IR receiver so that the POWER/ON LINE
indicator turns green.
Step 4: Connecting the AC Power Cords (Mains Leads)
Step 5: Adjusting the Wireless System
POWER
POWER ON-LINE
" / 1
POWER
POWER/ON LINE
indicator
continued