Sony KV-28DS20U - Manual (Page 21)

19
Additional TV Features
With this feature you can a) manually fine-tune the TV to obtain a better picture reception if the picture is distorted or b) preset
the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a
connected VCR records the unscrambled signal.
Using the further programme preset feature
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the v button to select the symbol on the menu
screen then press the b button to enter the ‘PRESET’
menu.
3. Press the v button to select ‘Further Programme Preset’
then press the b button to enter the ‘FURTHER
PROGRAMME PRESET’ menu.
4. Press the V or v buttons to select the relevant
programme number then press the b button repeatedly
to select a) AFT or b) DECODER. The selected item
changes colour.
Note: AFT will only be available on analoge channels.
5. a) AFT
Press the V or v buttons to fine tune the channel
frequency over a range of -15 to +15. Press the OK
button to confirm. Repeat steps 4 and 5a if you wish to
fine tune other channels.
b) DECODER
Press the
V or v buttons to select AV1, AV2 or AV3 for
the programme position and press the OK button to
confirm. You can now attach a decoder to the AV1, AV2
or the AV3 socket on the back of the TV and the picture
from that decoder will appear on this programme
number. Repeat steps 4 and 5b to preset the AV output
for other programme positions.
6. Press the MENU button to remove the menu from the
TV screen.
0
1
2
3
4
5
6
7
8
9
PROG
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
DECODER
On
On
On
On
On
On
On
On
On
On
AFT
FURTHER PROGRAMME PRESET
0
1
2
3
4
5
6
7
8
9
PROG
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
DECODER
On
On
On
On
On
On
10
On
On
On
AFT
FURTHER PROGRAMME PRESET