Manually tuning the tv – Sony KV-28DS20U User Manual
Page 25
23
Additional TV Features
You have already tuned the TV automatically using the instructions at the start of this manual. You can however carry out this
operation manually, adding channels to the TV, one at a time.
Manually tuning the TV
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the
v
button to select the
symbol on the TV
screen then press the
b
button to enter the PRESET menu.
3. Press the
v
button to select ‘Manual Programme Preset’
on the menu screen then press the
b
button to enter the
‘MANUAL PROGRAMME PRESET’ menu.
4. Press the
V
or
v
buttons to select an unused programme
number for your channel then press the
b
button to enter.
5. Press the
V
or
v
buttons to select the TV broadcast system
(I for analogue or DIG for digital) or a video input source
(AV1, AV2 ...) then press the
b
button to confirm.
6. Select the first number digit of ‘CHAN’ (channel) then the
second number digit of ‘CHAN’ with the number buttons
on the remote control
or
Press the
V
or
v
buttons to search for the next available
channel.
7. If you wish to change the ‘SERV’ service number, select
each digit in turn and press the numbered buttons on the
remote control to change to your desired service
8. If you do not wish to store this channel on the programme
number you selected, press the
V
or
v
buttons on the
remote control to continue searching for the desired
channel.
9. If this is the channel you wish to store, press the OK
button.
10. Repeat steps 4-8 if you wish to store more channels then
press the MENU button to remove the menu from the TV
screen.
NOTE: After manually tuning in the channels you require, you
can sort the channels into the order you prefer by following the
procedure ‘Re-arranging the TV channels’ on page 13.
03