Sony DAVLF1H - Manual (Page 44)

44 US
B
a
si
c
Op
er
a
ti
o
ns
Selecting the connected component
You can use a TV, VCR, or other components connected to the TV, VIDEO 1, or VIDEO 2 jacks on
the subwoofer. Refer to the operation manual supplied with the components for further information on
the operation.
Press FUNCTION +/– repeatedly until “TV,” “VIDEO 1,” or “VIDEO 2”appears in the front
panel display.
Each time you press FUNCTION +/–, the mode of the system changes in the following sequence.
DVD t FM t AM t TV t VIDEO 1 t VIDEO 2 t DVD t …
Note
• When you use both the TV (AUDIO IN) jacks (analog connection) and TV (DIGITAL IN OPTICAL) jack (digital
connection), or the VIDEO 1 or 2 (AUDIO IN) jacks (analog connection) and VIDEO 1 or 2 (DIGITAL IN
COAXIAL) jack (digital connection) at the same time, the digital connection takes priority.
Changing the input level of the sound from connected
components
You can change the input sensitivity of the AUDIO IN (VIDEO 1, VIDEO2, TV) jacks on the rear
panel.
1
Press FUNCTION +/– repeatedly until “TV,” “VIDEO 1,” or “VIDEO 2” appears in the front
panel display.
2
Press AMP MENU.
3
Press X / x repeatedly until “ATTENUATE” appears in the front panel display, then press
or c .
Enjoying the Radio or Other Components
AMP MENU
X/x/c ,
FUNCTION
+/–
With the cover opened.