SoundMax SM-CMD2021 - Manual (Page 17)

17
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if
RDS service is not available in you area, the following service is not available, either.
Band select
Press the BAND button on the front panel or BND/SYS button on RC repeatedly to select your
desired radio band during RADIO mode: FM1, FM2, FM3, AM1, AM2.
Scan
When SCAN button is pressed, the unit will search for the strongest signal for the nearby
station. After the strongest signal is got, the unit stops searching.
Auto/ Manual tuning
Manual tuning: Press briefly the SEEK-/+ buttons on the RC or press briefly /
buttons on the panel to select a station downward or upward step by step.
Automatic tuning: Press and hold for 2 seconds the SEEK-/+ buttons on the RC press
and hold for 2 seconds / buttons on the panel, the automatic search will start. It will
play when finds the station.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or
automatically.
To store a station:
Select a band (if needed)
Select a station by SEEK-/+ on the RC.
Hold a Preset button (1-6) which you want store the station for at least 2 seconds.
To recall a station:
Select a band (if needed)
Press a Preset button (1-6) briefly to recall the stored station