SoundMax SM-CMD2021 - Manual (Page 19)

19
TA (Traffic Alarm) function
Press the TA button on the panel to select TA ON or TA OFF.
In TA mode traffic program will be automatically searched, until the program is received.
When traffic announcement is received the unit will temporarily switch to the tuner mode
(regardless of the current mode) and begin broadcasting the announcement. After the traffic
announcement is over, it will return to the previous mode and volume level.
PTY (Program Type)
1.
Press PTY/CLK button on the panel to activate the PTY function. The previous PTY type is
shown.
2.
Press PTY/CLK once again to enter the MUSIC type or press twice to enter the SPEECH
type, then use buttons 1 - 6 to select the desired program type (see the following table).
3.
When PTY is selected, the radio starts to search corresponding PTY information, and stops
if the corresponding PTY information is detected.
4.
If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1
loop, if desired PTY is not found, NO PTY is flashed, then return to previous normal radio
and PTY word disappears.
5.
Press PTY button for the 3 rd time to switch the PTY function off.
Press SEL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the
needed item: TA SEEK/ALARM => RETUNE L/S => MASK DPI/ALL.