SoundMax SM-CMD2021 - Manual (Page 5)

5
Installation method A
After inserting the holder into the dashboard, select
the appropriate tab and bend them inwards to secure
the holder in place.
Insert fingers into the groove in the front of frame
and remove it.
Insert the levers supplied with the unit to the
grooves at both sides. The unit can be installed or
removed from the dashboard.
Installation way (method 2)
Installation using the screw holes at both sides of the unit.
1. Select a position where the screw holes of the main unit are fitted
for aligned, and tighten the screws at 2 positions at each side.
Use either truss screws (5 x 8mm) or flush surface screws (4 x
8mm), depending on the shape of the screw holes in the bracket.
2. Screw.
3. Factory radio mounting bracket.
4. Dashboard or Console.
5. Hook (Remove this part).
Note: The mounting box, outer trim ring, and the Half-sleeve are not
used for this method of installation.