Sanyo AVM-32F4 - Manual (Page 10)

19 18
PICTURE ADJUSTMENT
CUSTOM (MANUAL) ADJUSTMENT
You can sequentially select and adjust one of five picture properties.
Contrast, Brightness, Sharpness , Color, or Tint.
Press the MENU button. Move the
cursor to PICTURE by pressing the CH
/ buttons and press the VOL +
button.
Move the cursor to CONTRAST by
pressing the CH
/ buttons and
press the VOL + / - buttons.
Adjust " CONTRAST " with VOL + / -
buttons.
When you have finished contrast
adjustment, press MENU repeatedly until
the menus disappear.
1 1 1 1
2 2 2 2
3 3 3 3
CONTRAST 90
4 4 4 4
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE
: SEL + : ENTER : EXIT
PICTURE
CONTRAST : 90
BRIGHT : 50
SHARPNESS : 50
COLOR : 50
TINT : 0
: SEL. : ADJ : PREV.
PICTURE ADJUSTMENT
P.STD (Picture Standard) BUTTON
By pressing the P.STD button on the remote control, you can sequentially select one of four
preset picture standards.
(1) CUSTOM mode
(2) STANDARD mode
(3) DYNAMIC mode
(4) MILD mode
MODE PICTURE
CUSTOM
Select this mode to use your customized picture setting.
See next page.
Select this mode to use the
factory-preset standard picture setting
Select this mode
-To emphasize more contrast.
-To watch in brighter (daylight) environments.
Select this mode
- For soft contrast.
- When the room is dark.
- To lessen eye fatigue.
STANDARD
DYNAMIC
MILD