Sanyo AVM-32F4 - Manual (Page 5)

9 8
To view a connected video source, press the TV/VIDEO button on the side of the cabinet or
VIDEO button on the remote control.
(2) Side Input Jacks
Please use the side jacks (VIDEO 2) for a GAME-PLAYER or CAMCORDER.
To view a connected video source, press VIDEO button to set the TV to the VIDEO 2 mode.
(3) Audio System Connectors
You can hear the TV sound with a better stereo effect connecting the TV to your audio system.
The audio signal available at these jacks is the same as the audio source of the program being
monitored on this TV screen.
1. Adjust the volume of the TV to minimum.
2. Connect the AUDIO OUT jacks on the rear of the set with the AUDIO LINE IN jacks through
an optional AUDIO/VIDEO cable.
3. Set the INPUT SELECTION switch on the AMPLIFIER/AUDIO SYSTEM into the AUX
position and adjust the volume.
NOTE If you have no "AUX IN" jack on your audio system, connect to CD or Video jacks.
SPEAKERS
AMPLIFIER/AUDIO SYSTEM
AUDIO LINE INs
NOTES In the case that sound output of your VCR/VDP is MONO, connect it to "AUDIO IN L
(MONO)" Jack of your TV. Then the sound can be heard from both R and L speakers.
TO VIDEO OUT
TO AUDIO OUTS
GAME PLAYER
CAMCORDER
VCR or VDP
VIDEO/AUDIO CONNECTIONS
Prior to making any connections to your TV set, be sure to turn the POWER off.
For a more detailed understanding of each connection, it is recommended that you read the
instruction manual for each connected component.
If you use video or audio equipment placed near the TV, picture and/or sound may become
distorted due to interference between these components.
In such case, separate each piece of equipment at a sufficient distance.
The following shows examples for connecting external equipment.
Do not connect another audio source to the same speaker to which the TV set is connected,
otherwise it may damage the amplifier of the TV set or that of the other audio source.
(1) Rear Input Jacks
Please use the rear jacks (A/V IN ) for VCR , VDP or DVD.
1. A/V 1 IN jacks
2. S-VHS jack
3. Component Video In jacks
VHF/UHF
OUTPUT
TO VIDEO OUT VCR, VDP or DVD
TO AUDIO OUT
TO VIDEO IN
TO AUDIO IN
VHF/UHF
OUTPUT
TO AUDIO OUT TO AUDIO IN
VHF/UHF
OUTPUT
TO AUDIO OUT TO AUDIO IN
VCR, VDP or DVD
VCR, VDP or DVD
NOTE There will be no color in the video signal from the VIDEO OUTPUT jack when the
selected video source is COMPONENT VIDEO IN/OUT (YUV).
TV S-VHS 1 VIDEO 2 VIDEO 3 YUV