Sanyo AVM-32F4 - Manual (Page 18)

35 34
In this mode, you can enjoy viewing two programs at the same time.
PIP
PIP SIZE
PIP POSITION
PIP SWAP WITH MAIN SCREEN
MAIN
PIP
Press PIP on the remote control. When it is ON, the PIP
screen appears in the lower right corner. Press PIP again
to clear the PIP screen from the main screen.
1/9
PIP PIP
PIP PIP
Press SIZE to increase or decrease the PIP
screen size.
Press POSITION Key on the remote control unit
and the position of PIP changes as shown.
1/4
MAIN
PIP
Press SWAP to replace main screen with PIP
contents.
PICTURE-IN-PICTURE (PIP) AVM-32F9 ONLY
PIP STILL
MONITORING AV on PIP
STROBE
AV
PICTURE
STILL
Press STROBE for frame by frame movement.
1) PIP is divided into 9 screens, and each displays
the movement one frame per second.
(eg.) If you want to take a close look at the batting
form of a baseball player, press STROBE.
Nine PIP screens will display the movement
frame by frame in one second intervals.
2) Press STROBE or PIP to clear the function.
Press STILL to freeze-frame the picture.
Press STILL again to resume normal PIP screen.
1) Press PIP.
2) Press VIDEO to monitor AV source sequentially.
TV AV 1 AV 2 AV 3
PICTURE-IN-PICTURE (PIP) AVM-32F9 ONLY
NOTE
PIP can not function when blocking is on.
NOTE
Your TV set must be connected to a VCR for PIP to function.