Sennheiser Quadpack qp 3041 - Manual (Page 27)

28
28
Operation
Operating the receivers
The EK 3041 receivers mounted into the Quadpack are operated as ususal.
Turning the Quadpack on and off
̈ To turn the Quadpack on, set the POWER (ON/OFF) switch
µ
to posi-
tion “I”. The operation indicator ´ lights up red.
̈ To turn the Quadpack off, set the POWER (ON/OFF) switch µ to
position “0”. The operation indicator
´
goes off.
Note:
All receivers mounted into the Quadpack are turned on and off via the
Quadpack’s
POWER (ON/OFF) switch. If required, the individual
receivers can be turned on and off via their respective ON buttons.
Monitoring
For monitoring the audio signals of the mounted receivers, connect a pair of
headphones to the headphone output
¶
.
̈ Press the monitor key » of the receiver whose audio signal you wish to
monitor. The color of the control LED
¿
of the selected receiver chan-
ges from red to green.
̈ You can also press several monitor keys if you wish to monitor the audio
signals of several receivers simultaneously. The control LEDs of all
selected receivers light up green.
Note:
The monitor output has enough amplification headroom in order to
enable monitoring even at low modulation levels. The volume at the
monitor output should therefore only be turned up gradually!
´
µ
» ¿ ¶
! !"