Specifications – Sennheiser Quadpack qp 3041 User Manual
Page 31
32
32
Specifications
Overall unit
Receiver slots for up to four EK 3041 receivers:
at the front, fastened with four M2 screws respectively,
without additional adapter
RF connection:
via special angled plug
Antenna inputs:
2 x BNC at the rear
Antenna output
(for supplying two Quadpacks with the signals of two
antennas):
1 x BNC at the rear
Operating switch for overall unit (incl. receivers):
rocker switch at the rear
Operation indicator for overall unit:
red LED at the front
Operation indicator for receiver modules:
4 x LED at the front
Connector for external DC power supply:
4-pin XLR, male
Audio outputs:
3-pin XLR, male
Monitor output:
1/4
"
(6.35 mm) jack socket
Selection of monitor receiver:
via 4 “push-push” keys
Indication of selected monitor receiver:
color of operation indicator for receiver module chan-
ges from red to green
Selector switch for mic / line level :
slide switch at the rear
Level control for mic / line level :
potentiometer at the rear
Wideband input module can be exchanged
for a selective input module:
2 input modules at the rear
Supply voltage range:
10.5
–
18 V
DC
, 12 V
DC nominal
Current consumption with 4 receivers, peak deviation,
headphone output at nominal load:
490 mA/12 V
DC
Supply voltage for antenna boosters:
2 x 10.5
–
18 V, 50 mA nominal
Fuse: 1
AT
Temperature range:
–
10 ... +55° C
Dimensions:
approx. 214 x 230 x 85 mm (1/2 19
"
, 2 U)
Weight incl. receivers:
3,520 g
Wideband input module
Frequency range:
0
–
900 MHz
!"