Easy setup and adjustment, Other features, Character off” button (bkm-16r) – Sony BVM-L230 User Manual

Page 15: Color temperature selection, Aspect switch, Auto white balance, Auto chroma/phase adjustment, Internal test signal and smpte color bars

Advertising
background image

15

“Character Off” Button (BKM-16R)

To facilitate parameter adjustments, the On-Screen

Menu indication can be taken off the screen, while the

Menu mode is still active. The On-Screen Menu

indication can be toggled on or off simply by the press

of a button on the BKM-16R front panel.

Color Temperature Selection

The Color Temperature can be selected from D65, D93,

D61, D56, D-Cine*, or User1 to User5. A “Color Temp”

(Color Temperature) button located on the BKM-16R

front panel enables instant access to the “Color Temp

menu” without using the On-Screen menu.

* D-Cine: x=0.314, y=0.351

Aspect Switch

The aspect ratio can be switched

between 4:3, 16:9, 2.39: 1, and 1.869:1

depending on the input signal.

Auto White Balance

The color temperature and white balance of the

BVM-L230 monitor can be automatically adjusted by

the Auto White Balance function using the specified

color temperature probes*, such as the Konica Minolta

CA-210, DK-Technologies PM5639/06, and X-Rite

Eye-One Pro.

* A connector is required for each color analyzer.

Auto Chroma/Phase Adjustment*

An Auto Chroma/Phase/Matrix setup function is

provided on the BVM-L230, which automatically adjusts

the monitor’s chroma, phase, and matrix using external

color bars.

* Only analog signal input is supported.

Internal Test Signal and
SMPTE Color Bars

The BVM-L230 incorporates a built-in test signal

generator for a 100% white signal, 20% gray signal, 0%

black signal, PLUGE (Picture Line Up Generating

Equipment) signal, color-bar signals, 5-step grayscale

signal, and ramp signal.

Easy Setup and Adjustment

4:3 16:9

16:9 2.39:1

2.39:1 1.869:1

Other Features

VESA™ Mounting (200 x 100 mm pitch)

Blue Only

Mono

H Delay/V Delay

NTSC Setup Level (0%, 7.5%)

Component Level (SMPTE/EBU-N10 or Betacam)

Aperture

Serial Remote (Ethernet)

Parallel Remote (D-sub 9-pin)

Tally Lamp (Amber)

EXT Sync (for RGB/YUV)

Remote Maintenance

5

°

Tilt Forward

10

°

Tilt Backward

Advertising