Sony DR-BT22iK - Manual (Page 24)

DR-BT22iK [GB] 3-280-122-11(1)

DR-BT22iK [GB] 3-280-122-11(1)
Pairing headset with other Bluetooth transmitting devices
1
Place the Bluetooth transmitting device to be paired together
within 1 m (3 ft) of the headset.
2
Press and hold the POWER button of the headset for about 7
seconds or more to enter “Pairing in process” while the headset is
turned off.
Release the POWER button when the headset indicator starts
flashing quickly. The headset enters the pairing process.
3
Turning Bluetooth transmitting device to pairing standby
mode.
See the operating instructions supplied with the Bluetooth transmitting
device.
The list of detected devices appears on the display of the
Bluetooth transmitting device.
The headset is displayed as “DR-BT22.”
This headset indicator status will vary as follows, and pairing is
established with the Bluetooth transmitting device.
The headset indicator flashes quickly: Pairing in process

The headset indicator flashes (at about 1-second intervals) when
responding to the Bluetooth transmitting device: Connectable
(Pairing successful)

The headset indicator flashes (at about 5-second intervals):
Connected