Sony DR-BT22iK - Manual (Page 27)

DR-BT22iK [GB] 3-280-122-11(1) DR-BT22iK [GB] 3-280-122-11(1)

Re-pairing the transmitter and the headset
1
Turn on the power of iPod.
(Make sure the iPod is in pause mode.)
2
Connect the transmitter to the iPod (page 16).
3
Place the transmitter and the headset to be paired together
within 1 m (3 ft).
4
Press and hold the POWER button of the headset for about 7
seconds or more to enter “Pairing in process” while the headset is
turned off.
After about 3 seconds, the headset indicator (red) and the
headset indicator (blue) will flash twice, but keep pressing the
POWER button.
Release the POWER button when the headset indicator starts
flashing quickly. The headset enters the pairing process.
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter “Pairing in process.”
After about 1 second, the transmitter indicator will flash twice,
but keep pressing the power button.
Continued
