Attaching the presser foot shank – SINGER 1408 User Manual

Page 48

Advertising
background image

Attaching the Presser Foot Shank

41

Raise the presser foot bar

dge/ quilting

dge/ quilting

(a) with the presser foot lifter.

Attach the presser foot shank (b) as illustrated. (1)

Lower the presser foot shank (b) using the presser foot lifter,

until the cut-out (c) is directly above the pin (d). (2) The

presser foot (f) will engage automatically.

Raise the presser foot using the presser foot lifter. (3)
Raise the lever (e) and the foot disengages.

Attach the e

guide (g) in the slot as illustrated.

Adjust as needed for hems, pleats, quilting, etc. (4)

Turn power switch to off ("O") when carrying out any of

the above operations!

Attaching the presser foot

Removing the presser foot

Attaching the e

guide

Attention:

11

b

a

2

a

c

d

e

f

b

3

4

e

g

EN

Advertising
This manual is related to the following products: