Sony STR-DA3000ES - Manual (Page 26)

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY STR-
DA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm]
26 GB
model name1[STR-DA5000ES]
[4-247-188-13(4)]
Direct tuning
Enter a frequency of the station directly by using
NUM menu or numeric buttons on the remote.
For details on the supplied remote, refer to the
operating instructions supplied with the remote.
RM-LJ312
1
Press INPUT SELECTOR, then select
“TUNER” from the input list.
You can also use INPUT SELECTOR on
the receiver.
2
Press > repeatedly until SUB menu
appears, then select “FM/AM” from the
SUB menu to select the FM or AM band.
You can also use FM/AM on the receiver.
3
Select “DIRECT TUNING” from the SUB
menu.
4
Press > on the remote repeatedly until
NUM menu appears, then select the
numbers for the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
(You do not have to enter the last “0” when
the tuning scale is set to 100 kHz.)
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
(You do not have to enter the last “0” when
the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
RM-LG112
1
Move the easy scroll key to select
“TUNER”, then press the key
repeatedly to select “FM” or “AM”.
You can also use INPUT SELECTOR on
the receiver.
2
Press ALT, then press D.TUNING on
the remote.
3
Press the numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
(You do not have to enter the last “0” when
the tuning scale is set to 100 kHz.)
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
(You do not have to enter the last “0” when
the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right frequency.
If not, repeat step 4 (RM-LJ312) or step 3 (RM-
LG112). If the entered numbers still flash, the
frequency is not used in your area.