SMC Networks EliteConnect SMCWHSG14-G User Manual
Page 17
SMCWHSG14-G
16
2. Installation
The followings are instructions for setting up the Wireless Hotspot Gateway. Refer to the illustration and
follow the simple steps below to quickly install your Wireless Hotspot Gateway.
2-1 Wall-Mounting
The Wireless Hotspot Gateway can be wall-mounted on a wall by applying the two mounting brackets
on screws.
Figure 2-1 Wall-Mounting Bracket - Bottom of Wireless Hotspot Gateway
Please refer to the following instructions for mounting a Wireless Hotspot Gateway on a wall or other
surface.
1.
Install two screws on a wall according to the relative positions shown below.
Figure 2-2
2.
Hang Wireless Hotspot Gateway on the wall by sliding the two screws in the mounting brackets.
2-1.1 Bracket-Mounting
1. Attach the brackets to the device using the screws provided in the mounting kits.