Sony VGP-MR200U/E - Manual (Page 14)

14
Getting ready
The steps necessary to prepare the unit for use differ, depending on whether a wireless LAN or a
network cable is used to connect to the computer.
It is also possible to use the “Wireless LAN Setting Tool” that is included on the supplied utility
CD-ROM. For details on how to do this, see the separate document “For users connecting the
Network Media Receiver to a computer by wireless LAN”.
z
A useful tutorial and the EULA are also included on the supplied utility CD-ROM.
1. Prepare the remote control for use c Page 15
The remote control is necessary for operating the Network Media Receiver.
2. Connect the Network Media Receiver to a TV c Page 18
Select a suitable connector and cable according to the requirements of the TV monitor. It is also
possible to make the connection to the TV through a VCR.
3. Connect the Network Media Receiver to computer through a network cable
c Page 21
Connect the Network Media Receiver to the computer using a network cable. When using a
wireless connection, this step is not required.
4. Connect power c Page 29
Connect the supplied AC adapter to the Network Media Receiver to supply power.
5. Configure wireless LAN settings c Page 30
When the Network Media Receiver is to be connected to the computer through a wireless
connection, without using a network cable, several wireless LAN settings must be configured.
When using a network cable connection, this step is not required.
6. Change the settings of the Network Media Receiver to match the
network connection c Page 33
Depending on the network environment, some settings of the Network Media Receiver may
have to be changed. You have to define whether the IP address should be obtained
automatically or whether a fixed address should be used. The default setting is “Automatic
assignment (using router)”.
7. Configure settings at the computer c Page 35
The computer must be configured to share its photos, video, and music.
When using a VAIO computer, the VAIO Media software must be configured.
When using a different kind of computer, corresponding settings must be configured.