Sony VGP-MR200U/E - Manual (Page 30)

30
5 Configure wireless LAN settings
Use the screens displayed on your TV to configure the wireless LAN settings. If you are connecting
the Network Media Receiver to your computer through a network cable, skip this procedure, and go
to “6 Change the settings of the Network Media Receiver to match the network connection” (page
33).
See page 12 for the location of buttons on the remote control and page 15 for remote control
operations.
1
Press the TV POWER button on the remote control to turn on the TV
set.
2
Use the TV/VIDEO button on the remote control to set the TV to
display the signal from the input to which the Network Media Receiver
is connected.
3
Press the Network Media Receiver POWER button to turn on the
Network Media Receiver.
The standby indicator changes to green, and the “Select a server...” screen appears
on the TV.
Select a server•••
SELECT :Select :System Settings OPTIONS
4
Press the OPTIONS button on the remote control.
The OPTIONS menu appears.
5
Use the V/v buttons to select “System Settings” , and press the
SELECT button.
The “System Settings” screen appears.
System Settings
TV Type
Network Settings
Playback Preference
Firmware Update
Default Settings
System Information
Language Settings
SELECT :Select RETURN :Return
6
Use the V/v buttons to select “Network Settings”, and press the
SELECT button.
The “Network Settings” screen appears.