Sony VGP-MR200U/E - Manual (Page 10)

10
Names of parts
This section briefly identifies the parts of the unit. For details, see the pages shown in brackets ( ).
Front view
1 POWER button/standby indicator (pages 29, 38, 58)
Press this button to turn the unit on and off.
z
Hint
When the standby indicator is lit red, the unit is in Standby mode and can be turned on.
When the unit is on, the standby indicator is lit in green.
Note
If the standby indicator does not light up in red about 20 seconds after the power cord is connected,
visit the Sony Web site for additional instructions. See “Getting Help” (page 63).
2 Remote control sensor (page 15)
3 STATUS indicator (page 58)
4 WIRELESS indicator (page 58)
Side view
1 Ventilation holes
2 SET UP button (page 54)
Press this button when the standby indicator is lit green to display the “System Settings” screen.