Sony VGP-MR200U/E - Manual (Page 33)

Setup
33
6 Change the settings of the Network Media
Receiver to match the network connection
The factory default setting of the Network Media Receiver is “Automatic assignment (using
router)”. Depending on your system environment, this setting may have to be changed.
If a router is being used, there is no need to change the settings.
Use the screens displayed on your TV to configure the network settings.
See page 12 for the location of buttons on the remote control, and page 15 for remote control
operations.
1
Press the TV POWER button on the remote control to turn on the TV
set.
2
Use the TV/VIDEO button on the remote control to set the TV to
display the signal from the input to which the Network Media Receiver
is connected.
3
Press the Network Media Receiver POWER button to turn the Network
Media Receiver on.
The standby indicator changes to green, and the “Select a server...” screen appears
on the TV.
Select a server•••
SELECT :Select :System Settings OPTIONS
4
Press the OPTIONS button on the remote control.
The OPTIONS menu appears.