Sony VGP-MR200U/E - Manual (Page 55)

Advanced Features
55
Settings available on the “System Settings” screen
The “System Settings” screen offers the following settings:
Setting Setting method Default setting
reference page
TV Type 56
Network Settings
• Network Type 30
• IP Address 34
• Wireless LAN Configurations 30
Playback Preference 57
Firmware Update this page
Default Settings 56
System Information —
Language Settings 57
Note
If you select “High Definition TV”, the screen may go blank on some TV sets. If this happens, disconnect
the power cord of the Network Media Receiver, reconnect it, and turn on the Network Media Receiver
again.
To update the firmware
Visit the Web site listed in “Getting Help” (page 63) to update your Network Media Receiver to the
latest version and download any problem-solving firmware updates. For information on firmware
update procedures, refer to the instructions that accompany the downloaded tools. To get the most
out of this product, periodically visit the Web site and update the firmware of the Network Media
Receiver.
Notes
• During the update process, never disconnect the power cord or the network cable.
• After the update is complete, all settings except for the IP address return to the default settings.
Standard Definition TV
—
Wired LAN
Automatic assignment (using
router)
—
High compatiblity mode
—
—
—
English