Sun Microsystems FASTETHERNET 6U - Manual (Page 58)

40 Sun Quad FastEthernet 6U CompactPCI Adapter Installation and User’s Guide • June 2000
Connecting the Cables to the
Front-Access Adapter
After installing the adapter, you can attach the Ethernet cables to the adapter’s
connectors.
▼ To Connect the Cables to the Front-Access
Ethernet Ports
1. Locate the adapter that you installed in the system.
2. Connect one end of an Ethernet cable to an Ethernet port on the adapter (see
FIGURE 3-9 ).
FIGURE 3-9 Connecting Ethernet Cables to the Front-Access Adapter
3. Connect the other end of the Ethernet cable to an active Ethernet network.
Repeat Steps 2 and 3 for each Ethernet cable you need to connect.
Ethernet cable