Sharp VL-Z400H-T - Manual (Page 47)

Useful Features
35
Backlight
Compensation (BLC)
Available modes:
Tape Camera, Card Camera
When the subject is backlit, the image will
appear dark if it is recorded normally. Use
the backlight compensation (BLC) function
to brighten the entire screen.
• The example screens shown are for Tape
Camera mode.
1
In Tape Camera or Card Camera
mode, press the DISPLAY/MODE
SET button until the mode screen
appears.
2
Press l or m on the Operation
button to select “BLC/GAIN”, then
press the centre of the Operation
button.
3
Press l or m to select “ON x”,
then press the centre of the Operation
button.
E X E C U T E
B L C / G A I N
S E T M A N U A L
F O C U S
A U T O F O C U S
BLC / GA I N ON
A U T O A U T O
3 0 min 3 0 min
P A U S E P A U S E
4
Press the DISPLAY/MODE SET
button to turn off the mode screen.
• “x” appears when on-screen
indicators are turned on, indicating that
the backlight compensation is now
working.
To cancel the backlight compensa-
tion function
Select “OFF” in step 3 above.
VL-Z400H-032-036 04.3.23, 8:42 AM 35