Useful features camera recording – Sharp VL-Z400H-T User Manual

Page 56

Advertising
background image

Useful Features
Camera Recording

Useful Features

44

Self recording with reversed
grip

Available mode:

Tape Camera

Rotate the grip 105° and the LCD monitor
180° vertically so that you can record
yourself while holding the grip.

3

Open the LCD monitor to a 90° angle
to the camcorder body (1), and then
rotate it 180° vertically (2).

4

Set the Media Selection switch to V.

5

Set the Power switch to v.

6

Begin recording.

Notes:
• Do not rotate the monitor section to the self

recording position during recording or
playback.

• During self recording with reversed grip, the

mode or menu screen cannot be displayed.

• All of the manual settings are set to AUTO

and some other settings will set to OFF in self
recording with reversed grip.

• You may experience image noise when using

self recording.

• To operate self recording with reversed grip

correctly, make sure to turn the grip and the
lens section so that the Record Start/Stop
button and the tripod socket face upward,
and the lens faces toward you. The I
indicator will appear.

• Be sure that the LCD monitor rotation is

exactly 180°, otherwise the image recorded
will be rotated 180° upside-down.

• In self recording with reversed grip in Card

Camera mode, the still images will be
recorded rotated 180° upside down. The J
indicator will appear in this case.

• The viewfinder does not work in self

recording with reversed grip.

1

Turn the camcorder downward as
shown below.

2

Rotate the lens section 105° vertically
as shown below.

180°

90°

105°

VL-Z400H-037-047

04.3.23, 8:42 AM

44

Advertising